LOGO! Soft Comfort 8.2 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About LOGO! Soft Comfort 8.2 Download

LOGO! Soft Comfort 8.2 Download is a compact controller engineering tool from Siemens. This release is used by panel builders, electricians and machine builders to program, simulate and document LOGO! logic modules for small automation tasks. On this page you get a complete, ready-to-run LOGO! Soft Comfort 8.2 package together with a step-by-step installation walkthrough.

Key Capabilities of LOGO! Soft Comfort 8.2 Download

Project documentation and printout
Archiving of projects with comments
Transfer to the module over Ethernet or USB
Function block and ladder diagram editing
Integrated simulation mode before download
Analog and digital function blocks including timers and comparators

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
5–10 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Is a license dongle required?
The software is licensed per installation with a simple activation; no dongle is needed.

Does it run in a virtual machine?
Yes, the tool is lightweight and runs in any Windows VM.

Can I reuse old LOGO! programs?
Projects from earlier versions open after conversion; keep the original file for reference.

Is simulation included?
Yes, the built-in simulation mode runs the function chart with forced inputs before you touch hardware.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A water-pump station builder replaced relay logic with LOGO! modules programmed entirely in the office: every station was simulated with its real timer values before installation, and the electrician only had to wire and download. Small controllers still deserve a simulated test.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

SIMATIC WinCC V8.1 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About SIMATIC WinCC V8.1 Download

SIMATIC WinCC V8.1 Download is a SCADA visualization and operator-control system from Siemens. This release is used by plant engineers, control-room operators and system integrators to build process screens, alarm systems and production reports for plants of every size. Here you get the full SIMATIC WinCC V8.1 package plus a practical setup walkthrough written from commissioning experience.

Key Capabilities of SIMATIC WinCC V8.1 Download

Integrated user administration and electronic signatures
Trend and table controls for historical analysis
Open OPC and database connectivity for MES links
Redundant server operation for high-availability plants
Graphics Designer for process screens and faceplates
Tag Logging for measured-value archiving

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
25–60 GB free disk space depending on installed options
A compatible SQL Server instance is required for tag and alarm archiving
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

How many tags can one station handle?
Tag count depends on the power tag and archive configuration; size the server for peak archive load, not average.

Does it run in a virtual machine?
Yes, VMware or VirtualBox work for engineering and small runtime systems; give the VM enough RAM for the archive database.

Can older WinCC projects be opened?
Projects migrate forward release by release. Run the project converter on a copy first and keep the original archive.

What is the difference between engineering and runtime?
Engineering builds the screens and archives; a runtime license runs the final station in production. Plan both when budgeting.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A bottling line replacement showed the value of disciplined SCADA work: every screen was rebuilt with one shared faceplate library, alarm classes were pruned from 40 to 12, and commissioning ended two weeks early because operators recognized every panel from day one. Set the alarm philosophy before the first screen, not after the first outage.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

FTActivation Web 4.00.02 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About FTActivation Web 4.00.02 Download

FTActivation Web 4.00.02 Download is a license activation and management web tool from Rockwell Automation. This release is used by maintenance engineers and IT administrators managing Rockwell licenses to activate, move and reclaim Rockwell software licenses across factory computers. On this page you get a complete, ready-to-run FTActivation Web 4.00.02 package together with a step-by-step installation walkthrough.

Key Capabilities of FTActivation Web 4.00.02 Download

Activation of software licenses on target machines
License transfer between computers
Reactivation after hardware replacement
Bonding of licenses to dongles or disks
License inventory and reporting
Web and offline activation workflows

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
2–5 GB free disk space depending on installed options
A Rockwell account and your entitlement records are needed alongside the tool
1920×1080 display or larger

Installation Notes

Read the delivery note first: this item is the activation web component, not the full automation suite.
Collect your entitlement records and Rockwell account details before starting the activation workflow.
Prefer activating to a USB dongle when the licensed PC may be replaced soon.
Document which licenses are bonded to which host, and keep the list with your IT inventory.
Reclaim licenses from retired machines promptly — dormant activations slow every future recovery.

Frequently Asked Questions

Is this the full automation software?
No — this is the activation web component used to manage licenses for Rockwell products.

Can I move licenses to a new PC?
Yes, that is its core purpose: reclaim on the old host, activate on the new one.

What happens after a hardware failure?
Licenses bonded to failed hardware are rehosted through support workflows — keep your entitlement evidence.

Is a license dongle required?
The tool manages dongles; it is not itself dongle-licensed.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A plant lost a PC and with it a bonded license; recovery took two weeks of paperwork. After that, every activation went to a USB dongle stored in the IT safe — boring, swap-able, and immune to motherboard deaths.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

KEPServerEX6 V6.6 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About KEPServerEX6 V6.6 Download

KEPServerEX6 V6.6 Download is a industrial connectivity and OPC server platform from PTC (KEPServerEX). This release is used by automation and IT engineers bridging machines to software to connect PLCs, drives and devices to SCADA, historians and IT systems over one OPC platform. On this page you get a complete, ready-to-run KEPServerEX6 V6.6 package together with a step-by-step installation walkthrough.

Key Capabilities of KEPServerEX6 V6.6 Download

Drivers for hundreds of industrial devices
OPC UA and classic OPC serving
Built-in data logger to SQL databases
Redundancy and failover options
Security configuration per client
UGS gateway for cloud connectivity

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
10–20 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Does it run in a virtual machine?
Yes, connectivity servers run well in VMs; give them stable network access to controllers.

How are devices added?
Each driver adds a channel-device-tag tree; polling groups tune the load.

Can it buffer data on network loss?
The data logger can store-and-forward into SQL, covering short outages.

Is a license dongle required?
Licensing is per driver bundle with runtime counts.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A plant standardized every machine connection through one KEPServerEX instance; when the historian changed, not a single PLC project was touched. The connectivity layer is the firewall between the shop floor and every IT fashion.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

LOGO! Soft Comfort 8.0 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About LOGO! Soft Comfort 8.0 Download

LOGO! Soft Comfort 8.0 Download is a compact controller engineering tool from Siemens. This release is used by panel builders, electricians and machine builders to program, simulate and document LOGO! logic modules for small automation tasks. Here you get the full LOGO! Soft Comfort 8.0 package plus a practical setup walkthrough written from commissioning experience.

Key Capabilities of LOGO! Soft Comfort 8.0 Download

Integrated simulation mode before download
Analog and digital function blocks including timers and comparators
Project documentation and printout
Archiving of projects with comments
Transfer to the module over Ethernet or USB
Function block and ladder diagram editing

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
5–10 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Can I reuse old LOGO! programs?
Projects from earlier versions open after conversion; keep the original file for reference.

Is simulation included?
Yes, the built-in simulation mode runs the function chart with forced inputs before you touch hardware.

Is a license dongle required?
The software is licensed per installation with a simple activation; no dongle is needed.

Does it run in a virtual machine?
Yes, the tool is lightweight and runs in any Windows VM.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

LOGO! Soft Comfort 8.1 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About LOGO! Soft Comfort 8.1 Download

LOGO! Soft Comfort 8.1 Download is a compact controller engineering tool from Siemens. This release is used by panel builders, electricians and machine builders to program, simulate and document LOGO! logic modules for small automation tasks. This page delivers the complete LOGO! Soft Comfort 8.1 package with installation notes you can follow without guesswork.

Key Capabilities of LOGO! Soft Comfort 8.1 Download

Analog and digital function blocks including timers and comparators
Project documentation and printout
Archiving of projects with comments
Transfer to the module over Ethernet or USB
Function block and ladder diagram editing
Integrated simulation mode before download

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
5–10 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Is simulation included?
Yes, the built-in simulation mode runs the function chart with forced inputs before you touch hardware.

Is a license dongle required?
The software is licensed per installation with a simple activation; no dongle is needed.

Does it run in a virtual machine?
Yes, the tool is lightweight and runs in any Windows VM.

Can I reuse old LOGO! programs?
Projects from earlier versions open after conversion; keep the original file for reference.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

EcoStruxure Control Expert 16.2 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About EcoStruxure Control Expert 16.2 Download

EcoStruxure Control Expert 16.2 Download is a PLC programming and commissioning environment from Schneider. This release is used by control engineers working on M340, M580 and premium platforms to program, debug and maintain Modicon controllers with structured text, ladder and FBD languages. On this page you get a complete, ready-to-run EcoStruxure Control Expert 16.2 package together with a step-by-step installation walkthrough.

Key Capabilities of EcoStruxure Control Expert 16.2 Download

Multi-language programming with IEC 61131-3 compliance
Online modification and debug of running control logic
Native variables and DDT structures for clean data models
Motion and process control integration
Application diagnostics with animation tables
Project comparison and source control export

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
15–30 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Does it run in a virtual machine?
Yes, the engineering environment runs in a VM; use bridged networking for USB programming cables.

Is this the same as Unity Pro?
Control Expert is the successor of Unity Pro with the same project base; old Unity projects open after migration.

Can I modify code while the controller runs?
Online changes are supported; document them and fold them back into the source project the same day.

Is a license dongle required?
Licensing offers activation-based keys; a trial mode is available for evaluation.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A power-distribution yard standardized on online-change discipline: every hot modification was written on a printed change note and merged into the master project before the next shift. The plant that lost a summer to a diverged project understands why; the plant that never did should still follow the rule.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

KV STUDIO Ver. 11.62 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About KV STUDIO Ver. 11.62 Download

KV STUDIO Ver. 11.62 Download is a PLC programming software for KV series from KEYENCE. This release is used by automation and maintenance engineers to write, simulate and monitor ladder programs for KEYENCE KV controllers. Here you get the full KV STUDIO Ver. 11.62 package plus a practical setup walkthrough written from commissioning experience.

Key Capabilities of KV STUDIO Ver. 11.62 Download

Offline simulation with virtual IO
Online monitoring and forcing
Positioning module setup
Data logging from controllers
USB and Ethernet connection to PLCs
Ladder programming with instruction palettes

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
5–15 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Can programs from older KV Studio versions open?
Projects are upward compatible within the KV series; keep the original files.

How do I simulate?
The simulator executes the ladder with forced inputs, no hardware connected.

Is a license dongle required?
The software ships with KEYENCE controller support.

Does it run in a virtual machine?
Yes, the studio runs in a VM; pass through the USB programming cable.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A packaging-maintenance team standardized on one KV template program across ten machines; fault messages mapped identically everywhere, so night shift could diagnose any machine with one cheat sheet. Small PLCs reward standardization more than big ones — there are more of them.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

Fluidsim Fluiddraw 4.0 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About Fluidsim Fluiddraw 4.0 Download

Fluidsim Fluiddraw 4.0 Download is a fluid-power circuit design and simulation software from Festo (Art Systems). This release is used by pneumatics and hydraulics trainers and designers to draw and simulate pneumatic and hydraulic circuits with realistic component behavior. Here you get the full Fluidsim Fluiddraw 4.0 package plus a practical setup walkthrough written from commissioning experience.

Key Capabilities of Fluidsim Fluiddraw 4.0 Download

Stepwise and real-time simulation
Component data based on Festo catalogs
Fault insertion for training
Gradebook and course functions for education
DXF export for documentation
Pneumatic and hydraulic circuit drafting

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
5–15 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Can electrical control be mixed in?
Yes, electropneumatic circuits combine ladder or circuit control with the fluid simulation.

Is it suitable for production design?
It excels at education and concept validation; detailed production engineering belongs in full ECAD tools.

Is a license dongle required?
Licenses are activation-based with education packages.

Does it run in a virtual machine?
Yes, FluidSIM runs in any Windows VM with a graphics layer.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A maintenance school drilled apprentices with FluidSIM fault scenarios before they met the real press line; apprenticeship failures moved from expensive machines to harmless simulations. A mistake in simulation teaches exactly as much as one on hardware — at zero cost.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

Fluidsim Fluiddraw 4.2 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About Fluidsim Fluiddraw 4.2 Download

Fluidsim Fluiddraw 4.2 Download is a fluid-power circuit design and simulation software from Festo (Art Systems). This release is used by pneumatics and hydraulics trainers and designers to draw and simulate pneumatic and hydraulic circuits with realistic component behavior. This page delivers the complete Fluidsim Fluiddraw 4.2 package with installation notes you can follow without guesswork.

Key Capabilities of Fluidsim Fluiddraw 4.2 Download

Component data based on Festo catalogs
Fault insertion for training
Gradebook and course functions for education
DXF export for documentation
Pneumatic and hydraulic circuit drafting
Stepwise and real-time simulation

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
5–15 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Is it suitable for production design?
It excels at education and concept validation; detailed production engineering belongs in full ECAD tools.

Is a license dongle required?
Licenses are activation-based with education packages.

Does it run in a virtual machine?
Yes, FluidSIM runs in any Windows VM with a graphics layer.

Can electrical control be mixed in?
Yes, electropneumatic circuits combine ladder or circuit control with the fluid simulation.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download