Fanuc Robot System V8.3 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About Fanuc Robot System V8.3 Download

Fanuc Robot System V8.3 Download is a robot controller system software from FANUC. This release is used by robot programmers and maintenance engineers to operate and program FANUC robots from teach pendant handling programs to production backups. Here you get the full Fanuc Robot System V8.3 package plus a practical setup walkthrough written from commissioning experience.

Key Capabilities of Fanuc Robot System V8.3 Download

HandlingTool application software for pick and place
Backup and restore of controller images
Payload and TCP calibration tools
Error and alarm diagnostics with history
Integration with ROBOGUIDE for offline work
Teach-pendant programming with TP language and menus

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
15–30 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

How do I back up a controller?
Full image backup plus TP programs and variables — one without the other is only half a backup.

Can I restore to a different robot?
Images restore per controller type; a different arm needs mastering and payload setup afterward.

Is a license dongle required?
Controller options are licensed with the robot; base software is part of the controller.

Does it run in a virtual machine?
The controller software runs on the robot controller; engineers use VMs for image storage and ROBOGUIDE work.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A welding shop recovered a crashed controller in forty minutes because the maintenance lead kept dated image backups on a shelf next to the spare board. Backups live where the failure happens — in the hall, not on a server three buildings away.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

Fanuc Robot System V9.3 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About Fanuc Robot System V9.3 Download

Fanuc Robot System V9.3 Download is a robot controller system software from FANUC. This release is used by robot programmers and maintenance engineers to operate and program FANUC robots from teach pendant handling programs to production backups. This page delivers the complete Fanuc Robot System V9.3 package with installation notes you can follow without guesswork.

Key Capabilities of Fanuc Robot System V9.3 Download

Backup and restore of controller images
Payload and TCP calibration tools
Error and alarm diagnostics with history
Integration with ROBOGUIDE for offline work
Teach-pendant programming with TP language and menus
HandlingTool application software for pick and place

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
15–30 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Can I restore to a different robot?
Images restore per controller type; a different arm needs mastering and payload setup afterward.

Is a license dongle required?
Controller options are licensed with the robot; base software is part of the controller.

Does it run in a virtual machine?
The controller software runs on the robot controller; engineers use VMs for image storage and ROBOGUIDE work.

How do I back up a controller?
Full image backup plus TP programs and variables — one without the other is only half a backup.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

Fanuc Robot System V9.4 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About Fanuc Robot System V9.4 Download

Fanuc Robot System V9.4 Download is a robot controller system software from FANUC. This release is used by robot programmers and maintenance engineers to operate and program FANUC robots from teach pendant handling programs to production backups. On this page you get a complete, ready-to-run Fanuc Robot System V9.4 package together with a step-by-step installation walkthrough.

Key Capabilities of Fanuc Robot System V9.4 Download

Payload and TCP calibration tools
Error and alarm diagnostics with history
Integration with ROBOGUIDE for offline work
Teach-pendant programming with TP language and menus
HandlingTool application software for pick and place
Backup and restore of controller images

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
15–30 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Is a license dongle required?
Controller options are licensed with the robot; base software is part of the controller.

Does it run in a virtual machine?
The controller software runs on the robot controller; engineers use VMs for image storage and ROBOGUIDE work.

How do I back up a controller?
Full image backup plus TP programs and variables — one without the other is only half a backup.

Can I restore to a different robot?
Images restore per controller type; a different arm needs mastering and payload setup afterward.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

FANUC Robot System V9.1 Download

Package Contents Description

What’s in the file?

The installation program
A video showing how to install
A video with additional details

Important:
If the file you download only has a “Read.txt” file inside, that means the software is broken. We need to upload it again.

What to do if that happens:

Email us right away
We will re-upload the files within 1 day
We will email you when the new download is ready

About FANUC Robot System V9.1 Download

FANUC Robot System V9.1 Download is a robot controller system software from FANUC. This release is used by robot programmers and maintenance engineers to operate and program FANUC robots from teach pendant handling programs to production backups. On this page you get a complete, ready-to-run FANUC Robot System V9.1 package together with a step-by-step installation walkthrough.

Key Capabilities of FANUC Robot System V9.1 Download

Teach-pendant programming with TP language and menus
HandlingTool application software for pick and place
Backup and restore of controller images
Payload and TCP calibration tools
Error and alarm diagnostics with history
Integration with ROBOGUIDE for offline work

System Requirements

Windows 10/11 64-bit (Professional recommended)
8 GB RAM minimum, 16 GB recommended
15–30 GB free disk space depending on installed options
1920×1080 display or larger

Installation Notes

Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection during setup — installers that copy licensed components are frequently false-flagged.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.

Frequently Asked Questions

Does it run in a virtual machine?
The controller software runs on the robot controller; engineers use VMs for image storage and ROBOGUIDE work.

How do I back up a controller?
Full image backup plus TP programs and variables — one without the other is only half a backup.

Can I restore to a different robot?
Images restore per controller type; a different arm needs mastering and payload setup afterward.

Is a license dongle required?
Controller options are licensed with the robot; base software is part of the controller.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

ROBOGUIDE V9.4 Z Download

Can’t find the software you need?
Email us.
We’ll send it to you.

➤ Before You Install

Before you install, set up your computer.

①If you have antivirus, remove it. Turn off the firewall.
②Restart your computer.

➤ Step1 ✱✱ Install

Run Setup.exe as administrator to install it.

About ROBOGUIDE V9.4 Z Download

This page provides ROBOGUIDE V9.4 Z Download, the industrial robot programming and offline tooling suite by FANUC, in a complete install-ready package. Whether you are rebuilding an engineering station or setting up a fresh commissioning laptop, follow the guide below and you will be up and running in minutes.

Key Capabilities of ROBOGUIDE V9.4 Z Download

Collision and reachability checking across the whole program
Automatic robot and rail placement suggestions
Support for multiple robot brands and external axes
Process I/O simulation for weld, gripper and conveyor logic
Cycle-time analysis and TCP path optimization
Virtual teach pendant identical to the real controller

System Requirements

Windows 10/11 64-bit
16 GB RAM recommended for large workcells
20 GB free disk space, SSD strongly recommended for simulation smoothness
Discrete GPU with OpenGL/DirectX support improves 3D performance

Installation Notes

Temporarily disable antivirus and Windows Defender real-time protection — installers that copy licensed components are frequently false-flagged.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.
Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Do not connect any USB license dongle until the setup program has finished completely.
Launch the application once with administrator rights so it can register its components before first normal use.

Frequently Asked Questions

Will programs transfer directly to the real robot?
Programs created offline load on the physical controller after frame and tool data are verified on site.

Do I need the real robot to test programs?
No — the offline environment includes a virtual controller that behaves like the real one, so most logic and paths can be verified on the PC.

Can I import my CAD fixtures?
Yes, common CAD formats are supported; simplify heavy geometry to keep the simulation responsive.

What about system versions?
Match the offline software version to the robot controller version to avoid subtle behavior differences.

ROBOGUIDE V9.4 Z — Frequently Asked Questions

➤ Step2 ✱✱ Activation

① Run the activation tool as administrator.
② Enter your serial number, or import your license file.
③ Click the “Activate” button.

Enter your activation key (from official, agent, or other seller).
Or import the license file.
This usually activates it.
If needed, restart your computer once.

➤ Step3 ✱✱ Reset computer

➤ Step4 ✱✱ Running App

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

For a machine-tending cell, ROBOGUIDE V9.4 Z cycle validation in the digital twin settled the throughput argument before any equipment was ordered. Three things made that possible: the station was built from the customer’s real fixture CAD, tool data was measured rather than assumed, and reach tests ran at full cycle speed before sign-off. Never trust a simulated cycle time to better than a few percent; measure the real cell before promising throughput to a customer.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

ROBOGUIDE V9.4 S Download

Can’t find the software you need?
Email us.
We’ll send it to you.

➤ Before You Install

Before you install, set up your computer.

①If you have antivirus, remove it. Turn off the firewall.
②Restart your computer.

➤ Step1 ✱✱ Install

Run Setup.exe as administrator to install it.

About ROBOGUIDE V9.4 S Download

ROBOGUIDE V9.4 S Download is a industrial robot programming and offline tooling suite developed by FANUC. This release is used daily by system integrators, maintenance engineers and OEM builders to program, document and commission automated equipment. On this page you get a complete, ready-to-run ROBOGUIDE V9.4 S package together with a step-by-step installation walkthrough.

Key Capabilities of ROBOGUIDE V9.4 S Download

Full 3D workcell modeling with reach and collision studies
Virtual teach pendant identical to the real controller
Automatic robot and rail placement suggestions
Cycle-time analysis and TCP path optimization
Process I/O simulation for weld, gripper and conveyor logic
Collision and reachability checking across the whole program

System Requirements

Windows 10/11 64-bit
16 GB RAM recommended for large workcells
20 GB free disk space, SSD strongly recommended for simulation smoothness
Discrete GPU with OpenGL/DirectX support improves 3D performance

Installation Notes

Temporarily disable antivirus and Windows Defender real-time protection — installers that copy licensed components are frequently false-flagged.
Launch the application once with administrator rights so it can register its components before first normal use.
Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Do not connect any USB license dongle until the setup program has finished completely.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.

Frequently Asked Questions

What about system versions?
Match the offline software version to the robot controller version to avoid subtle behavior differences.

Can I import my CAD fixtures?
Yes, common CAD formats are supported; simplify heavy geometry to keep the simulation responsive.

Will programs transfer directly to the real robot?
Programs created offline load on the physical controller after frame and tool data are verified on site.

Do I need the real robot to test programs?
No — the offline environment includes a virtual controller that behaves like the real one, so most logic and paths can be verified on the PC.

ROBOGUIDE V9.4 S — Frequently Asked Questions

➤ Step2 ✱✱ Activation

① Run the activation tool as administrator.
② Enter your serial number, or import your license file.
③ Click the “Activate” button.

Enter your activation key (from official, agent, or other seller).
Or import the license file.
This usually activates it.
If needed, restart your computer once.

➤ Step3 ✱✱ Reset computer

➤ Step4 ✱✱ Running App

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A palletizing cell programmed entirely offline with ROBOGUIDE V9.4 S reached the floor needing less than an hour of touch-up per robot. What carried the job: every path annotated with named offline targets, home positions documented, and the signal handshake table agreed with the PLC team before the first jog. Don’t let anyone teach points around a singularity without reviewing the tool load data first — that is how wrist faults appear on otherwise perfect paths.

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

ROBOGUIDE V8.3 Download

ROBOGUIDE V8.3 has no patch yet, but it offers a 30-day free trial.
Members interested in ROBOGUIDE V8.3 can download, install, and try it out.
For unpatched applications, we do not provide installation tutorials or remote assistance.
For members who have purchased the patched version on our website, we will provide installation tutorials and remote support.

Refer to ROBOGUIDE V9.4 Z for installation steps.

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

About ROBOGUIDE V8.3 Download

This page provides ROBOGUIDE V8.3 Download, the industrial robot programming and offline tooling suite by FANUC, in a complete install-ready package. Whether you are rebuilding an engineering station or setting up a fresh commissioning laptop, follow the guide below and you will be up and running in minutes.

Key Capabilities of ROBOGUIDE V8.3 Download

Process I/O simulation for weld, gripper and conveyor logic
Virtual teach pendant identical to the real controller
Offline program creation without stopping production
Automatic robot and rail placement suggestions
Full 3D workcell modeling with reach and collision studies
Cycle-time analysis and TCP path optimization

System Requirements

Windows 10/11 64-bit
16 GB RAM recommended for large workcells
20 GB free disk space, SSD strongly recommended for simulation smoothness
Discrete GPU with OpenGL/DirectX support improves 3D performance

Installation Notes

Launch the application once with administrator rights so it can register its components before first normal use.
Reboot the PC once after installation completes — this finalizes driver and service registration.
Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.

Frequently Asked Questions

What about system versions?
Match the offline software version to the robot controller version to avoid subtle behavior differences.

Will programs transfer directly to the real robot?
Programs created offline load on the physical controller after frame and tool data are verified on site.

Do I need the real robot to test programs?
No — the offline environment includes a virtual controller that behaves like the real one, so most logic and paths can be verified on the PC.

Can I import my CAD fixtures?
Yes, common CAD formats are supported; simplify heavy geometry to keep the simulation responsive.

Tips from Real Projects

On a twelve-robot welding line, ROBOGUIDE V8.3 offline paths held so well that commissioning was mostly calibration and safety walks. The differences came from small things: correct load data on every tool, approach angles planned away from singularity regions, and programs released with a one-page commissioning sheet. If simulation and the real cell drift apart, check workpiece calibration first — nine out of ten offline-to-online mismatches are a frame issue, not the program.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

ROBOGUIDE V9.2 J Download

Can’t find the software you need?
Email us.
We’ll send it to you.

➤ Before You Install

Before you install, set up your computer.

①If you have antivirus, remove it. Turn off the firewall.
②Restart your computer.

➤ Step1 ✱✱ Install

Run Setup.exe as administrator to install it.

About ROBOGUIDE V9.2 J Download

ROBOGUIDE V9.2 J Download from FANUC is a industrial robot programming and offline tooling suite widely used in factory automation projects. The version on this page is packaged for straightforward installation on a standard engineering PC. The screenshots below walk you through every dialog so nothing is left to guesswork.

Key Capabilities of ROBOGUIDE V9.2 J Download

Process I/O simulation for weld, gripper and conveyor logic
Virtual teach pendant identical to the real controller
Full 3D workcell modeling with reach and collision studies
Cycle-time analysis and TCP path optimization
Automatic robot and rail placement suggestions
Offline program creation without stopping production

System Requirements

Windows 10/11 64-bit
16 GB RAM recommended for large workcells
20 GB free disk space, SSD strongly recommended for simulation smoothness
Discrete GPU with OpenGL/DirectX support improves 3D performance

Installation Notes

Do not connect any USB license dongle until the setup program has finished completely.
Reboot the PC once after installation completes — this finalizes driver and service registration.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.
Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
Run the installer as administrator and keep the default path unless your company standard requires otherwise.

Frequently Asked Questions

Will programs transfer directly to the real robot?
Programs created offline load on the physical controller after frame and tool data are verified on site.

Can I import my CAD fixtures?
Yes, common CAD formats are supported; simplify heavy geometry to keep the simulation responsive.

Do I need the real robot to test programs?
No — the offline environment includes a virtual controller that behaves like the real one, so most logic and paths can be verified on the PC.

What about system versions?
Match the offline software version to the robot controller version to avoid subtle behavior differences.

ROBOGUIDE V9.2 J — Frequently Asked Questions

➤ Step2 ✱✱ Activation

① Run the activation tool as administrator.
② Enter your serial number, or import your license file.
③ Click the “Activate” button.

Enter your activation key (from official, agent, or other seller).
Or import the license file.
This usually activates it.
If needed, restart your computer once.

➤ Step3 ✱✱ Reset computer

➤ Step4 ✱✱ Running App

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

For a machine-tending cell, ROBOGUIDE V9.2 J cycle validation in the digital twin settled the throughput argument before any equipment was ordered. Three things made that possible: the station was built from the customer’s real fixture CAD, tool data was measured rather than assumed, and reach tests ran at full cycle speed before sign-off. Never trust a simulated cycle time to better than a few percent; measure the real cell before promising throughput to a customer.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

ROBOGUIDE V10 A Download

Can’t find the software you need?
Email us.
We’ll send it to you.

➤ Before You Install

Before you install, set up your computer.

①If you have antivirus, remove it. Turn off the firewall.
②Restart your computer.

➤ Step1 ✱✱ Install

Run Setup.exe as administrator to install it.

About ROBOGUIDE_V10 A Download

ROBOGUIDE_V10 A from FANUC is a industrial robot programming and offline tooling suite widely used in factory automation projects. The version on this page is packaged for straightforward installation on a standard engineering PC. The screenshots below walk you through every dialog so nothing is left to guesswork.

Key Capabilities of ROBOGUIDE_V10 A Download

Collision and reachability checking across the whole program
Full 3D workcell modeling with reach and collision studies
Support for multiple robot brands and external axes
Virtual teach pendant identical to the real controller
Offline program creation without stopping production
Process I/O simulation for weld, gripper and conveyor logic

System Requirements

Windows 10/11 64-bit
16 GB RAM recommended for large workcells
20 GB free disk space, SSD strongly recommended for simulation smoothness
Discrete GPU with OpenGL/DirectX support improves 3D performance

Installation Notes

If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Temporarily disable antivirus and Windows Defender real-time protection — installers that copy licensed components are frequently false-flagged.
Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.
Reboot the PC once after installation completes — this finalizes driver and service registration.

Frequently Asked Questions

Do I need the real robot to test programs?
No — the offline environment includes a virtual controller that behaves like the real one, so most logic and paths can be verified on the PC.

Will programs transfer directly to the real robot?
Programs created offline load on the physical controller after frame and tool data are verified on site.

Can I import my CAD fixtures?
Yes, common CAD formats are supported; simplify heavy geometry to keep the simulation responsive.

What about system versions?
Match the offline software version to the robot controller version to avoid subtle behavior differences.

ROBOGUIDE V10 A — Frequently Asked Questions

➤ Step2 ✱✱ Activation

① Run the activation tool as administrator.
② Enter your serial number, or import your license file.
③ Click the “Activate” button.

Enter your activation key (from official, agent, or other seller).
Or import the license file.
This usually activates it.
If needed, restart your computer once.

➤ Step3 ✱✱ Reset computer

➤ Step4 ✱✱ Running App

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

A palletizing cell programmed entirely offline with ROBOGUIDE V10 A reached the floor needing less than an hour of touch-up per robot. What carried the job: every path annotated with named offline targets, home positions documented, and the signal handshake table agreed with the PLC team before the first jog. Don’t let anyone teach points around a singularity without reviewing the tool load data first — that is how wrist faults appear on otherwise perfect paths.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download

ROBOGUIDE V9.1 H Download

Can’t find the software you need?
Email us.
We’ll send it to you.

➤ Before You Install

Before you install, set up your computer.

①If you have antivirus, remove it. Turn off the firewall.
②Restart your computer.

➤ Step1 ✱✱ Install

Run Setup.exe as administrator to install it.

About ROBOGUIDE V9.1 H Download

ROBOGUIDE V9.1 H Download from FANUC is a industrial robot programming and offline tooling suite widely used in factory automation projects. The version on this page is packaged for straightforward installation on a standard engineering PC. The screenshots below walk you through every dialog so nothing is left to guesswork.

Key Capabilities of ROBOGUIDE V9.1 H Download

Full 3D workcell modeling with reach and collision studies
Virtual teach pendant identical to the real controller
Offline program creation without stopping production
Collision and reachability checking across the whole program
Support for multiple robot brands and external axes
Process I/O simulation for weld, gripper and conveyor logic

System Requirements

Windows 10/11 64-bit
16 GB RAM recommended for large workcells
20 GB free disk space, SSD strongly recommended for simulation smoothness
Discrete GPU with OpenGL/DirectX support improves 3D performance

Installation Notes

Do not connect any USB license dongle until the setup program has finished completely.
After installation, re-enable antivirus protection and add the program folder to the allowed list if your policy requires it.
Temporarily disable antivirus and Windows Defender real-time protection — installers that copy licensed components are frequently false-flagged.
If a controller or robot connection will be used, allow the software through the Windows firewall when prompted.
Extract the downloaded archive with the password shown at the bottom of this page, using a recent version of WinRAR or 7-Zip.

Frequently Asked Questions

Do I need the real robot to test programs?
No — the offline environment includes a virtual controller that behaves like the real one, so most logic and paths can be verified on the PC.

Will programs transfer directly to the real robot?
Programs created offline load on the physical controller after frame and tool data are verified on site.

Can I import my CAD fixtures?
Yes, common CAD formats are supported; simplify heavy geometry to keep the simulation responsive.

What about system versions?
Match the offline software version to the robot controller version to avoid subtle behavior differences.

ROBOGUIDE V9.1 H — Frequently Asked Questions

➤ Step2 ✱✱ Activation

① Run the activation tool as administrator.
② Enter your serial number, or import your license file.
③ Click the “Activate” button.

Enter your activation key (from official, agent, or other seller).
Or import the license file.
This usually activates it.
If needed, restart your computer once.

➤ Step3 ✱✱ Reset computer

➤ Step4 ✱✱ Running App

Setup Complest

If you have problems installing, email us.
We can help you remotely and fix the problems.

Tips from Real Projects

For a machine-tending cell, ROBOGUIDE V9.1 H cycle validation in the digital twin settled the throughput argument before any equipment was ordered. Three things made that possible: the station was built from the customer’s real fixture CAD, tool data was measured rather than assumed, and reach tests ran at full cycle speed before sign-off. Never trust a simulated cycle time to better than a few percent; measure the real cell before promising throughput to a customer.

Files are delivered on our partner site up-der.com — a free account is required for some downloads.

Enter the download page

All files here are WinRAR files.
You must use WinRAR to open them.
Windows’ own unzip tool will not work.
Please download the newest WinRAR.

WinRAR Download